Differences

This shows you the differences between two versions of the page.

--- linuxmce_ap [2016/01/23 20:50] – [/etc/network/interfaces] admin
+++ linuxmce_ap [2016/03/16 18:21] – [Change firewall] admin
@@ Line 4: / Line 4: @@
   sudo apt-get install bridge-utils hostapd
-===== Run hostap =====
-  sudo hostapd /etc/hostapd/hostapd.conf
-===== Change firewall =====
-pluto main -> firewall -> IntIF -> eth0 to br0
 ===== Configs =====
@@ Line 45: / Line 36: @@
 iface br0 inet static
+         post-up /usr/sbin/hostapd -B /etc/hostapd/hostapd.conf
+         post-up service isc-dhcp-server restart
          bridge_ports eth0 wlan0
          address 192.168.80.1
@@ Line 188: / Line 181: @@
 rsn_pairwise=CCMP
 </code>
+==== /etc/default/hostapd ====
+<code config hostapd>
+# Defaults for hostapd initscript
+#
+# See /usr/share/doc/hostapd/README.Debian for information about alternative
+# methods of managing hostapd.
+#
+# Uncomment and set DAEMON_CONF to the absolute path of a hostapd configuration
+# file and hostapd will be started during system boot. An example configuration
+# file can be found at /usr/share/doc/hostapd/examples/hostapd.conf.gz
+#
+#DAEMON_CONF=""
+DAEMON_CONF="/etc/hostapd/hostapd.conf"
+# Additional daemon options to be appended to hostapd command:-
+# 	-d   show more debug messages (-dd for even more)
+# 	-K   include key data in debug messages
+# 	-t   include timestamps in some debug messages
+#
+# Note that -B (daemon mode) and -P (pidfile) options are automatically
+# configured by the init.d script and must not be added to DAEMON_OPTS.
+#
+#DAEMON_OPTS=""
+</code>
+===== Change firewall =====
+pluto main -> firewall -> IntIF -> eth0 to br0
+===== Run hostap =====
+  sudo hostapd /etc/hostapd/hostapd.conf
+====== Guest Network (IGNORE) ======
+old mac address:
+:9a:dd:c3:67:c4
+change it to **02**:9a:dd:c3:67:**30** using (bold values are required, the middle part can be taken from the original mac address):
+  ifconfig wlan0 down
+  ifconfig wlan0 hw ether 02:9a:dd:c3:67:30
+  ifconfig wlan0 up

Differences

Page Tools