knallimall.org knallimall.org

User Tools

Site Tools

linuxmce_ap

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
linuxmce_ap [2016/01/23 19:21] – [Configs] adminlinuxmce_ap [2016/07/22 20:24] (current) – admin
Line 4: Line 4:
  
   sudo apt-get install bridge-utils hostapd   sudo apt-get install bridge-utils hostapd
-===== Run hostap ===== 
- 
-  sudo hostapd /etc/hostapd/hostapd.conf 
- 
- 
- 
-===== Change firewall ===== 
- 
-pluto main -> firewall -> IntIF -> eth0 to br0 
  
 ===== Configs ===== ===== Configs =====
Line 40: Line 31:
  
 # --- Internal NIC --- # --- Internal NIC ---
-iface eth0 inet static +iface eth0 inet manual
- address 192.168.80.1 +
- netmask 255.255.255.0 +
- pre-up sysctl -q -e -w  net.ipv6.conf.eth0.disable_ipv6=1 +
-       # DNS Settings for Internal Net +
-        dns-nameservers 192.168.80.1 +
-        dns-search LinuxMCE+
  
-# --- Wlan0 --- +iface wlan0 inet manual
-iface wlan0 inet static +
- address 192.168.81.1 +
- netmask 255.255.255.0 +
- pre-up sysctl -q -e -w  net.ipv6.conf.eth0.disable_ipv6=1 +
- dns-nameservers 192.168.81.1+
  
-#iface br0 inet static +iface br0 inet static 
-#         bridge_ports eth0 wlan0 +         post-up /usr/sbin/hostapd -B /etc/hostapd/hostapd.conf 
-#         address 192.168.80.1 +         post-up service isc-dhcp-server restart 
-#         netmask 255.255.255.0 +         bridge_ports eth0 wlan0 
-#          # DNS Settings for Internal Net +         address 192.168.80.1 
-#         dns-nameservers 192.168.80.1 +         netmask 255.255.255.0 
-#         dns-search LinuxMCE+          # DNS Settings for Internal Net 
 +         dns-nameservers 192.168.80.1 
 +         dns-search LinuxMCE
  
 ##### #####
Line 144: Line 126:
  
 } }
- 
-# option routers 192.168.81.1; 
-# option domain-name-servers 192.168.81.1; 
- 
-#subnet 192.168.81.0 netmask 255.255.255.0 { 
-#        next-server 192.168.80.1; 
-#        filename "/tftpboot/pxelinux.0"; 
-#        option pxelinux.reboottime = 30; 
-# option routers 192.168.81.1; 
-# option domain-name-servers 192.168.81.1; 
-# 
-##       default-lease-time 86400; 
-#        max-lease-time 604800; 
-#        pool { 
-#                 allow unknown-clients; 
-#                 range 192.168.81.129 192.168.81.150; 
-#                 range 192.168.81.152 192.168.81.199; 
-#        } 
-# 
-#        zone   80.168.192.in-addr.arpa. { 
-#                primary localhost; 
-#                key     "rndc-key"; 
-#        } 
-#        zone    LinuxMCE. { 
-#                primary localhost; 
-#                key     "rndc-key"; 
-#        } 
-# 
-#} 
- 
  
 # PXE booting machines # PXE booting machines
Line 208: Line 160:
  
 <code config isc-dhcp-server> <code config isc-dhcp-server>
-INTERFACES="eth0 wlan0"+INTERFACES="br0"
 </code> </code>
  
Line 219: Line 171:
 ssid=test ssid=test
 hw_mode=g hw_mode=g
-channel=1+channel=7 
 +ieee80211n=1 
 +wmm_enabled=1 
 +ht_capab=[SHORT-GI-40]
 macaddr_acl=0 macaddr_acl=0
 auth_algs=1 auth_algs=1
Line 229: Line 184:
 rsn_pairwise=CCMP rsn_pairwise=CCMP
 </code> </code>
 +
 +
 +==== /etc/default/hostapd ====
 +
 +<code config hostapd>
 +# Defaults for hostapd initscript
 +#
 +# See /usr/share/doc/hostapd/README.Debian for information about alternative
 +# methods of managing hostapd.
 +#
 +# Uncomment and set DAEMON_CONF to the absolute path of a hostapd configuration
 +# file and hostapd will be started during system boot. An example configuration
 +# file can be found at /usr/share/doc/hostapd/examples/hostapd.conf.gz
 +#
 +#DAEMON_CONF=""
 +DAEMON_CONF="/etc/hostapd/hostapd.conf"
 +
 +# Additional daemon options to be appended to hostapd command:-
 +# -d   show more debug messages (-dd for even more)
 +# -K   include key data in debug messages
 +# -t   include timestamps in some debug messages
 +#
 +# Note that -B (daemon mode) and -P (pidfile) options are automatically
 +# configured by the init.d script and must not be added to DAEMON_OPTS.
 +#
 +#DAEMON_OPTS=""
 +</code>
 +
 +===== Change firewall =====
 +
 +pluto main -> firewall -> IntIF -> eth0 to br0
 +
 +===== Run hostap =====
 +
 +  sudo hostapd /etc/hostapd/hostapd.conf
 +
 +====== Guest Network (IGNORE) ======
 +
 +old mac address:
 +  
 +  10:9a:dd:c3:67:c4
 +  
 +change it to **02**:9a:dd:c3:67:**30** using (bold values are required, the middle part can be taken from the original mac address):
 +
 +  ifconfig wlan0 down
 +  ifconfig wlan0 hw ether 02:9a:dd:c3:67:30
 +  ifconfig wlan0 up 
 +
 +
linuxmce_ap.1453576915.txt.gz · Last modified: 2016/01/23 19:21 by admin

Page Tools