knallimall.org knallimall.org

User Tools

Site Tools

pi5_proxmox

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
pi5_proxmox [2024/04/27 11:17] – [Resources] adminpi5_proxmox [2024/05/05 10:44] (current) – [Change boot order to boot from NVMe] admin
Line 1: Line 1:
 ====== Proxmox on Raspberry Pi5 ====== ====== Proxmox on Raspberry Pi5 ======
  
 +This is a little summary on how to setup an run VMs using Proxmox on a NVMe
 ===== Resources ===== ===== Resources =====
  
-  * NVMe setup: [[https://www.jeffgeerling.com/blog/2023/nvme-ssd-boot-raspberry-pi-5|Jeff Geerlin Blog]] and [[https://www.heise.de/tests/Kurztest-Raspberry-Pi-5-mit-M-2-SSD-betreiben-9581242.html|Heise]]+  * NVMe setup: [[https://www.jeffgeerling.com/blog/2023/nvme-ssd-boot-raspberry-pi-5|Jeff Geerling Blog]] and [[https://www.heise.de/tests/Kurztest-Raspberry-Pi-5-mit-M-2-SSD-betreiben-9581242.html|Heise]]
   * Proxmox install: https://github.com/jiangcuo/Proxmox-Port/wiki/Install-Proxmox-VE-on-Debian-bookworm#install-proxmox-ve-on-debian-bookworm   * Proxmox install: https://github.com/jiangcuo/Proxmox-Port/wiki/Install-Proxmox-VE-on-Debian-bookworm#install-proxmox-ve-on-debian-bookworm
   * Additional information on how to create a VM (section "VM erstellen"): https://www.bachmann-lan.de/proxmox-8-auf-dem-raspberry-pi-4-installieren/   * Additional information on how to create a VM (section "VM erstellen"): https://www.bachmann-lan.de/proxmox-8-auf-dem-raspberry-pi-4-installieren/
Line 62: Line 63:
 ==== Change boot order to boot from NVMe ==== ==== Change boot order to boot from NVMe ====
  
-Run ''rpi-eeprom-config -e'', change ''BOOT_ORDER'' and add ''PCIE_PROBE=1''+Run ''rpi-eeprom-config -e'', change ''BOOT_ORDER'' and add ''PCIE_PROBE=1'' or use ''raspi-config'' (Select Advanced Option -> Boot Order -> NVMe/USB Boot Boot from NVMe before trying USB and then SD Card) 
  
 <code> <code>
Line 119: Line 121:
 </code> </code>
  
 +
 +==== Configure SSH ====
 +
 +Allow the ''root'' user to login via SSH by adding the following line in ''/etc/ssh/sshd_config'':
 +
 +<code>
 +PermitRootLogin yes
 +</code>
 +
 +Set a password for the root user:
 +
 +<code>
 +passwd
 +</code>
 +
 +
 +Restart ssh
 +
 +<code>
 +systemctl restart sshd
 +</code>
  
 ===== Network ===== ===== Network =====
Line 168: Line 191:
 when logged in as ''root'' (''sudo -i'') when logged in as ''root'' (''sudo -i'')
  
-===== Display setup for console =====+===== Required VM settings, otherwise it won't boot ===== 
 + 
 +When you get "display output is not active" in console it might indicate  
 +that you need to change the settings as described below. 
 + 
 + 
 +Select the VM to be configured. Click on "Hardware" 
 + 
 +  * CD/DVD Drive: select a ISO file (arm64 images required) 
 +  * BIOS: OVMF (UEFI) 
 +  * Machine: Default (virt) 
 +  * Add -> EFI Disk, select "local" 
 + 
 + 
 +Hardware settings 
 + 
 +{{:hardware.png?600|}} 
 + 
 +Add EFI Disk
  
-FIXME+{{:uefi.png?600|}}
pi5_proxmox.1714216655.txt.gz · Last modified: 2024/04/27 11:17 by admin

Page Tools