Differences

This shows you the differences between two versions of the page.

--- pi5_proxmox [2024/04/27 11:59] – [Required VM settings, otherwise it won't boot] admin
+++ pi5_proxmox [2024/05/05 10:44] (current) – [Change boot order to boot from NVMe] admin
@@ Line 4: / Line 4: @@
 ===== Resources =====
-  * NVMe setup: [[https://www.jeffgeerling.com/blog/2023/nvme-ssd-boot-raspberry-pi-5|Jeff Geerlin Blog]] and [[https://www.heise.de/tests/Kurztest-Raspberry-Pi-5-mit-M-2-SSD-betreiben-9581242.html|Heise]]
+  * NVMe setup: [[https://www.jeffgeerling.com/blog/2023/nvme-ssd-boot-raspberry-pi-5|Jeff Geerling Blog]] and [[https://www.heise.de/tests/Kurztest-Raspberry-Pi-5-mit-M-2-SSD-betreiben-9581242.html|Heise]]
   * Proxmox install: https://github.com/jiangcuo/Proxmox-Port/wiki/Install-Proxmox-VE-on-Debian-bookworm#install-proxmox-ve-on-debian-bookworm
   * Additional information on how to create a VM (section "VM erstellen"): https://www.bachmann-lan.de/proxmox-8-auf-dem-raspberry-pi-4-installieren/
@@ Line 63: / Line 63: @@
 ==== Change boot order to boot from NVMe ====
-Run ''rpi-eeprom-config -e'', change ''BOOT_ORDER'' and add ''PCIE_PROBE=1''
+Run ''rpi-eeprom-config -e'', change ''BOOT_ORDER'' and add ''PCIE_PROBE=1'' or use ''raspi-config'' (Select Advanced Option -> Boot Order -> NVMe/USB Boot Boot from NVMe before trying USB and then SD Card)
 <code>
@@ Line 191: / Line 192: @@
 ===== Required VM settings, otherwise it won't boot =====
+When you get "display output is not active" in console it might indicate
+that you need to change the settings as described below.
 Select the VM to be configured. Click on "Hardware"

Differences

Page Tools